 |
 |
 |
 |
 |
 |
 |
 |
 |
  |
 |
|
|
|
|
|
|
|
|
|
| |
|
 |
Technical Data
- Flow rates up to 1250 GPM
- Total delivery heads up to 575 feet
- Temperature ratings from +15°F (-10°C) to +575°F (+300°C)
- Pressure rating up to 580 PSIG
Special constructions available.
Pumping
isocyanates
polycarbonates
oils and fats
manomeres
polyesters
resins
viscous liquids
Applications
Refineries
Chemical and petrochemical industries
Synthetic and rubber industries
Mineral oil industry
Paint and lacquer industries
Construction
- horizontal screw pump
- permanent magnet drive system, no shaft duct
- separation of liquid chamber/atmosphere by means of an isolation shell
- synchronous drive transmitted by inner and outer magnet systems
- internal bearings made of pure, sintered silicon carbide, alpha grade, liquid lubricated, for absorption of radial and axial loads
- bearings of outer magnet carrier: deep groove ball bearing
- two screw spindles, rotating towards each other
- spindles supported in bearing bushings
- hydraulic compensation of axial force
Standard Construction
Nodular Cast Iron Hardened Steel 316 Ti/Hastelloy C4 316 Ti/Hastelloy C4 Carbon/Silicon Carbide, Alpha Grade Cast Steel/Nodular Cast Iron Rare Earth Samarium Cobalt Further materials available.
Specifications are subject to change. Materials listed are equivalent to DIN/ISO standards.
